mirror of
https://github.com/dnlbauer/corax-keyboard.git
synced 2026-09-10 21:25:29 +00:00
35 lines
1.9 KiB
Markdown
35 lines
1.9 KiB
Markdown
# Corax56
|
|
|
|
## Bill of materials
|
|
|
|
**Essentials**:
|
|
| **Item** | **Count** | **Note** |
|
|
|---------------------------------|-----------|----------|
|
|
| Keyboard PCB | 2 | |
|
|
| Nice!Nano | 2 | |
|
|
| 12 pin headers and sockets | 4 | You can use through-hole diode legs as pins. Sockets spacing: 2.54mm, Socket height: Using minimal height sockets might not leave enough room to mount the battery under the MCU. 3DS1002-01-1*20V13-JK by CONNFLY are a good choice, but you can also use lower ones and longer legs instead. Spiltkb has a good [guide on mounting](https://docs.splitkb.com/hc/en-us/articles/360011263059). |
|
|
| LiPo battery (301230) | 2 | 110mAh |
|
|
| Kailh Choc v1 switches (PG1350) | 56 | |
|
|
| Keycaps | 56 | |
|
|
| Kailh Choc hotswap sockets | 56 | |
|
|
| Encoder EVQWGD001 | 2 | |
|
|
| Diodes 1N4148W | 58 | for each key + encoder |
|
|
| Buttons | 2 | reset buttons; 2 pins through-hole, tactile, 3x6x4.3mm |
|
|
| Slider Switches | 2 | on/off switches; SMD, C128955 |
|
|
| USB-C Cable | 1 | for copying the firmware
|
|
|
|
|
|
**Optional (Displays, 3d printed case)**:
|
|
|
|
| **Item** | **Count** | **Note** |
|
|
|---------------------------------|-----------|----------|
|
|
| Nice!View + mounts | 2 | |
|
|
| Switchplate | 2 | Height: 1.2mm; either 3d printed or cut pcbs. [stl](./3dprints/switchplate/) |
|
|
| Case (Left + Right) | 1 | see [here](./3dprints/case/). |
|
|
| Silicone feet | 8 | |
|
|
|
|
## Firmware
|
|
|
|
The firmware repository can be found here: [https://github.com/dnlbauer/corax56-zmk-config](https://github.com/dnlbauer/corax56-zmk-config).
|
|
|