mirror of
https://github.com/dnlbauer/corax-keyboard.git
synced 2026-09-10 13:15:29 +00:00
1.9 KiB
1.9 KiB
Corax54
Bill of materials
Essentials:
| Item | Count | Note |
|---|---|---|
| Keyboard PCB | 2 | |
| Nice!Nano | 2 | |
| 12 pin headers and sockets | 4 | You can use through-hole diode legs as pins. Sockets spacing: 2.54mm, Socket height: Using minimal height sockets might not leave enough room to mount the battery under the MCU. 3DS1002-01-1*20V13-JK by CONNFLY are a good choice, but you can also use lower ones and longer legs instead. Spiltkb has a good guide on mounting. |
| LiPo battery (301230) | 2 | 110mAh |
| Kailh Choc v1 switches (PG1350) | 54 | |
| Keycaps | 54 | |
| Kailh Choc hotswap sockets | 54 | |
| Encoder EVQWGD001 | 2 | |
| Diodes 1N4148W | 56 | for each key + encoder |
| Buttons | 2 | reset buttons; 2 pins through-hole, tactile, 3x6x4.3mm |
| Slider Switches | 2 | on/off switches; SMD, C128955 |
| USB-C Cable | 1 | for copying the firmware |
Optional (Displays, 3d printed case):
| Item | Count | Note |
|---|---|---|
| Nice!View + mounts | 2 | |
| Switchplate | 2 | Height: 1.2mm; either 3d printed or cut pcbs. stl |
| Case (Left + Right) | 1 | see here. |
| Silicone feet | 8 |
Firmware
The firmware repository can be found here: https://github.com/dnlbauer/corax54-zmk-config.