units:
  kx: cx  # cx=18
  ky: cy  # cy=17
  mbkx: 17.5
  mbky: 16.5
  padding: 2
  px: kx+padding
  py: ky+padding
  mcu_height: 34
  mcu_width: 18
  mcu_padding: 1
  scrollwheel_width: 17
  scrollwheel_height: 14
points:
  rotate: 5
  zones:
    matrix:
      # fix placement on kicad
      anchor.shift: [50, -150]
      key:
        tags: [switch]
        padding: 1ky
        spread: 1kx
      columns:
        outer2:
          rows:
            mod.skip: true
            bottom.skip: true
            home:
              bind: [0, 5, 0, 0]
              row_net: col0
            top.skip: true
            num.skip: true
          key.column_net: row0
        outer:
          rows:
            num.skip: true
            mod.skip: true
          key:
            column_net: row0
        pinky:
          rows:
            mod.skip: true
          key:
            origin: [0, 8]
            column_net: row1
        ring:
          rows:
            mod.skip: true
          key:
            origin: [0, 8]
            stagger: 0.33ky
            splay: -5
            column_net: row2
        middle:
          key:
            stagger: 0.2ky
            column_net: row3
          rows:
            mod:
              column_net: row1
        index:
          key:
            stagger: -0.33ky
            column_net: row4
          rows:
            mod:
              column_net: row2
        inner:
          rows:
            mod.skip: true
          key:
            stagger: -2.5
            column_net: row5
      rows:
        mod:
          row_net: col4
        bottom:
          row_net: col3
        home:
          row_net: col2
        top:
          row_net: col1
        num:
          row_net: col0
    thumbs:
      anchor:
        ref: matrix_middle_home
        shift: [38, -45]
      key:
        tags: [switch]
        padding: 1ky
        spread: 1kx
      columns:
        layer:
          key:
            splay: -15
            column_net: row3
        space:
          key:
            width: 1.5kx
            splay: 75
            shift: [13-kx, -3]
            column_net: row4
            tags: [switch_space]
      rows:
        cluster:
          row_net: col4
    scrollwheel:
      anchor:
        ref: matrix_inner_bottom
      columns:
        scrollwheel:
          key:
            tags: [scrollwheel]
            shift: [kx+mcu_padding-0.75, 0.1py]
            column_net: row5
            width: scrollwheel_width
            height: scrollwheel_height
      rows:
        scrollwheel:
          row_net: col4
    mcu:
      anchor:
        ref: matrix_inner_num
      columns:
        mcu:
          key:
            tags: [mcu]
            width: mcu_height  # footprint width/height unintuitive
            height: mcu_width
            rotate: -90
            shift: [kx+mcu_padding, -mcu_width/2-0.3]
outlines:
  keys:
    - what: rectangle
      where: true
      fillet: 2
      size: [mbkx, mbky]
  raw:
    - what: rectangle
      where: true
      bound: true
      size: [px+5, py+5]
  fillet:
    - what: outline
      name: raw
      fillet: 2
  board:
    - what: polygon
      operation: stack
      # fillet: 2
      points:
        - ref: matrix_outer2_home
          shift: [-0.5px, -0.5py]
        - ref: matrix_outer2_home
          shift: [-0.5px, 0.5py]
        - ref: matrix_outer_top
          shift: [-0.5px, 0.5py]
        - ref: matrix_pinky_num
          shift: [-0.5px, 0.5py]
        - ref: matrix_ring_num
          shift: [-0.5px, 0.5py]
        - ref: matrix_middle_num
          shift: [-0.5px, 0.5py]
        - ref: matrix_middle_num
          shift: [0.5px, 0.5py]
        - ref: matrix_inner_num
          shift: [0.5px, 0.5py]
        - ref: matrix_inner_num
          #shift: [0.5px+mcu_padding+mcu_width-0.9, 0.5py]  
          shift: [0.5px+mcu_padding+mcu_width, 0.5py]  
        - ref: matrix_inner_bottom
          #shift: [0.5px+mcu_padding+mcu_width-0.9, -0.5py]
          shift: [0.5px+mcu_padding+mcu_width, -0.5py]
        - ref: thumbs_space_cluster
          shift: [0.5px, -0.5py]
        - ref: thumbs_space_cluster
          shift: [-0.5px, -0.5py]
        - ref: matrix_middle_mod
          shift: [-0.5px, -0.5py]  
        - ref: matrix_outer_bottom
          shift: [-0.5px, -0.5py]
pcbs:
  keyboard:
    outlines.main.outline: board
    footprints:
      choc_hotswap:
        what: choc
        where: [switch, switch_space]
        params:
          keycaps: true
          reverse: true
          hotswap: true
          from: "{{column_net}}"
          to: "{{colrow}}"
        adjust:
          rotate: 180
      diode:
        what: diode
        where: [switch]
        params:
          from: "{{colrow}}"
          to: "{{row_net}}"
        adjust:
          rotate: 0
          shift: [0, -9]
      diode_space:
        what: diode
        where: [switch_space]
        params:
          from: "{{colrow}}"
          to: "{{row_net}}"
        adjust:
          rotate: -90
          # 8.275 is exactly above the pad
          shift: [-8.275, 1]
      scrollwheel:
        what: scrollwheel_mirrored
        where: [scrollwheel]
        params:
          from: "{{column_net}}"
          to: "{{colrow}}"
          A: ENCB_undef
          B: GND_ENCA
          C: ENCA_GND
          D: undef_ENCB
      scroll_diode:
        what: diode
        where: [scrollwheel]
        params:
          from: "{{colrow}}"
          to: "{{row_net}}"
        adjust:
          shift: [-5, -9]
      jumper_sw_left_a:
        what: jumper
        where: [scrollwheel]
        params:
          side: B  
          to: ENCB_undef
          from: ENCB
        adjust:
          rotate: 90
          shift: [-2, 3.81]
      jumper_sw_left_gnd:
        what: jumper
        where: [scrollwheel]
        params:
          side: B  
          to: GND_ENCA
          from: GND
        adjust:
          rotate: 90
          shift: [-2, 1.27]
      jumper_sw_left_ENCA:
        what: jumper
        where: [scrollwheel]
        params:
          side: B  
          to: ENCA_GND
          from: ENCA
        adjust:
          rotate: 90
          shift: [-2, -1.27]
      jumper_sw_right_a:
        what: jumper
        where: [scrollwheel]
        params:
          side: F  
          to: undef_ENCB
          from: ENCB
        adjust:
          rotate: 90
          shift: [-2, -3.81]
      jumper_sw_right_gnd:
        what: jumper
        where: [scrollwheel]
        params:
          side: F  
          to: ENCA_GND
          from: GND
        adjust:
          rotate: 90
          shift: [-2, -1.27]
      jumper_sw_right_ENCA:
        what: jumper
        where: [scrollwheel]
        params:
          side: F  
          to: GND_ENCA
          from: ENCA
        adjust:
          rotate: 90
          shift: [-2, 1.27]
      promicro:
        what: promicro
        where: mcu
        params:
          orientation: down
          RAW: RAW_P1
          GND1: GND_P0
          RST: RST_GND
          VCC: VCC_GND 
          P21: ENCA
          P20: ENCB
          P19: row0
          P18: row1
          P15: row2
          P14: row3
          P16: row4
          P10: row5
          P1: P1_RAW
          P0: P0_GND
          GND2: GND_RST
          GND3: GND_VCC
          P2: SDA
          P3: SCL
          P4: CS
          P5: col0
          P6: col1
          P7: col2
          P8: col3
          P9: col4
      jumper_text_left:
        what: text
        where: mcu
        params:
          side: "F"
          text: "Place Nice!Nano face down &\\nsolder jumpers on the back side."
        adjust:
          rotate: 90
      jumper_text_right:
        what: text
        where: mcu
        params:
          side: "B"
          text: "Place Nice!Nano face down &\\nsolder jumpers on the back side."
        adjust:
          rotate: 90
      jumper_left_raw:
        what: jumper
        where: mcu
        params:
          from: RAW
          to: RAW_P1
          side: B
        adjust:
          shift: [-11.45, -2.5]
          rotate: 180
      jumper_left_rst:
        what: jumper
        where: mcu
        params:
          from: RST
          to: RST_GND
          side: B
        adjust:
          shift: [-8.9, -2.5]
          rotate: 180
      jumper_left_vcc:
        what: jumper
        where: mcu
        params:
          from: VCC
          to: VCC_GND
          side: B
        adjust:
          shift: [-6.35, -2.5]
          rotate: 180
      jumper_left_gnd:
        what: jumper
        where: mcu
        params:
          from: GND
          to: GND_RST
          side: B
        adjust:
          shift: [-8.9, 2.5]
      jumper_right_raw:
        what: jumper
        where: mcu
        params:
          from: RAW
          to: P1_RAW
          side: F
        adjust:
          shift: [-11.45, 2.5]
      jumper_right_rst:
        what: jumper
        where: mcu
        params:
          from: RST
          to: GND_RST
          side: F
        adjust:
          shift: [-8.9, 2.5]
      jumper_right_vcc:
        what: jumper
        where: mcu
        params:
          from: VCC
          to: GND_VCC
          side: F
        adjust:
          shift: [-6.35, 2.5]
      jumper_right_gnd:
        what: jumper
        where: mcu
        params:
          from: GND
          to: RST_GND
          side: F
        adjust:
          shift: [-8.9, -2.5]
          rotate: 180
      niceview:
        what: niceview
        where: mcu
        adjust:
          shift: [20.5, 0]
          rotate: 180
        params:
          outline: true
          side: 'F'
          SDA: NN_SDA_CS
          SCL: NN_SCL_GND
          VCC: NN_VCC
          GND: NN_GND_SCL
          CS: NN_CS_SDA
      jumper_nv_left_sda:
        what: jumper
        where: mcu
        params:
          from: SDA
          to: NN_SDA_CS
          side: B
        adjust:
          shift: [20.50-2.5, -5.08]
          rotate: -90
      jumper_nv_left_scl:
        what: jumper
        where: mcu
        params:
          from: SCL
          to: NN_SCL_GND
          side: B
        adjust:
          shift: [20.50-2.5, -2.54]
          rotate: -90
      jumper_nv_left_vcc:
        what: jumper
        where: mcu
        params:
          from: VCC
          to: NN_VCC
          side: B
        adjust:
          shift: [20.50-2.5, 0]
          rotate: -90
      jumper_nv_left_gnd:
        what: jumper
        where: mcu
        params:
          from: GND
          to: NN_GND_SCL
          side: B
        adjust:
          shift: [20.50-2.5, 2.54]
          rotate: -90
      jumper_nv_left_cs:
        what: jumper
        where: mcu
        params:
          from: CS
          to: NN_CS_SDA
          side: B
        adjust:
          shift: [20.50-2.5, 5.08]
          rotate: -90
      jumper_nv_right_sda:
        what: jumper
        where: mcu
        params:
          from: SDA
          to: NN_CS_SDA
          side: F
        adjust:
          shift: [20.50-2.5, 5.08]
          rotate: -90
      jumper_nv_right_scl:
        what: jumper
        where: mcu
        params:
          from: SCL
          to: NN_GND_SCL
          side: F
        adjust:
          shift: [20.50-2.5, 2.54]
          rotate: -90
      jumper_nv_right_vcc:
        what: jumper
        where: mcu
        params:
          from: VCC
          to: NN_VCC
          side: F
        adjust:
          shift: [20.50-2.5, 0]
          rotate: -90
      jumper_nv_right_gnd:
        what: jumper
        where: mcu
        params:
          from: GND
          to: NN_SCL_GND
          side: F
        adjust:
          shift: [20.50-2.5, -2.54]
          rotate: -90
      jumper_nv_right_cs:
        what: jumper
        where: mcu
        params:
          from: CS
          to: NN_SDA_CS
          side: F
        adjust:
          shift: [20.50-2.5, -5.08]
          rotate: -90
      slider_f:
        what: slider
        where: mcu
        adjust:
          shift: [-17.1, 0]
          rotate: 90
        params:
          side: F
          from: switch_from
          to: RAW
      slider_b:
        what: slider
        where: mcu
        adjust:
          shift: [-17.1, 0]
          rotate: 90
        params:
          side: B
          from: switch_from
          to: RAW
      battery:
        what: battery
        where: mcu
        adjust:
          shift: [-17, 0]
        params:
          RAW: switch_from
      reset:
        what: reset
        where: mcu
        params:
          from: GND
          to: RST
        adjust:
          shift: [10+mcu_height/2, 0]
          rotate: -90
      plexi_inner:
        what: hole
        where: mcu
        params:
          size: 3.5
          drill: 2.2
        adjust:
          shift: [10+mcu_height/2, -mcu_width/2+1.5]
      plexi_outer:
        what: hole
        where: mcu
        params:
          size: 3.5
          drill: 2.2
        adjust:
          shift: [10+mcu_height/2, mcu_width/2-1.5]
      screw_hole_top_left:
        what: hole
        where:
          ref.aggregate.parts: [matrix_ring_num, matrix_ring_top]
          shift: [-11, 0]
        params:
          size: 4.7
          drill: 4.1
      screw_hole_top_right:
        what: hole
        where:
          ref.aggregate.parts: [matrix_index_num, matrix_inner_num, matrix_index_top, matrix_inner_top]
          shift: [0, -2]
        params:
          size: 4.7
          drill: 4.1
      screw_hole_bottom_left:
        what: hole
        where:
          ref.aggregate.parts: [matrix_outer_home, matrix_outer_bottom, matrix_pinky_home, matrix_pinky_bottom]
          shift: [0, -1]
        params:
          size: 4.7
          drill: 4.1
      screw_hole_bottom_right:
        what: hole
        where:
          ref.aggregate.parts: [matrix_middle_bottom, matrix_index_bottom]
          shift: [0, -12]
        params:
          size: 4.7
          drill: 4.1
      screw_hole_thumb:
        what: hole
        where:
          ref.aggregate.parts: [thumbs_layer_cluster, thumbs_space_cluster]
          shift: [10, 8]
        params:
          size: 4.7
          drill: 4.1
      left_text:
        what: text
        where: matrix_middle_home
        params:
          text: "Left Hand Front"
          side: F
          knockout: true
        adjust:
          shift: [0, 4]
          rotate: 90
      right_text:
        what: text
        where: matrix_middle_home
        params:
          text: "Right Hand Front"
          side: B
          knockout: true
        adjust:
          rotate: 90
          shift: [0, 4]