rule ergogen
  description = Build kicad files
  command = ergogen $infolder -o $outfolder

rule stepfile
  description = Create stepfile
  command = kicad-cli pcb export step $in -o $out

rule stepfile1.2
  description = Create a stepfile with a board height of 1.2 mm
  command = kicad-cli pcb export step $in -o $out && sed -i -e "s/1\.6)/1.2)/g" $out

build pcb/pcbs/keyboard.kicad_pcb pcb/pcbs/switchplate.kicad_pcb: ergogen
  infolder = ./ergogen
  outfolder = ./pcb

pool kicad_pool
  depth = 1

rule drill
  description = Create drill files and drill map
  command = kicad-cli pcb export drill --generate-map --map-format gerberx2 --excellon-separate-th $in -o $outfolder
  pool = kicad_pool

rule gerbers
  description = Create gerber files
  command = kicad-cli pcb export gerbers --subtract-soldermask  -l $layer $in -o $outfolder
  pool = kicad_pool

build pcb/pcbs/switchplate.step: stepfile1.2 pcb/pcbs/switchplate.kicad_pcb

build pcb/pcbs/keyboard.step: stepfile pcb/pcbs/keyboard.kicad_pcb

build gerbers/keyboard-PTH.drl gerbers/keyboard-NPTH.drl: drill pcb/pcbs/keyboard.kicad_pcb
  outfolder = ./gerbers/
build gerbers/keyboard-F_CU.gbr: gerbers pcb/pcbs/keyboard.kicad_pcb
  layer = "F.Cu,B.Cu,F.Paste,B.Paste,F.Silkscreen,B.Silkscreen,F.Mask,B.Mask,Edge.Cuts"
  outfolder = ./gerbers/