Revert "move config to own repo"

This reverts commit 26e8e8c18c.

zmk-config/config/boards/shields/ownkb/Kconfig.defconfig

@@ -0,0 +1,19 @@
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+if SHIELD_OWNKB_LEFT
+
+config ZMK_KEYBOARD_NAME
+    default "ownkb"
+
+config ZMK_SPLIT_ROLE_CENTRAL
+    default y
+
+endif
+
+if SHIELD_OWNKB_LEFT || SHIELD_OWNKB_RIGHT
+
+config ZMK_SPLIT
+    default y
+
+endif

zmk-config/config/boards/shields/ownkb/Kconfig.shield

@@ -0,0 +1,9 @@
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+
+config SHIELD_OWNKB_LEFT
+    def_bool $(shields_list_contains,ownkb_left)
+
+config SHIELD_OWNKB_RIGHT
+    def_bool $(shields_list_contains,ownkb_right)

zmk-config/config/boards/shields/ownkb/ownkb.conf

@@ -0,0 +1,11 @@
+# Copyright (c) 2023 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+# Uncomment these two lines to add support for encoders
+# CONFIG_EC11=y
+# CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y
+
+# Uncomment these 3 lines to use default zmk view widget
+# CONFIG_ZMK_DISPLAY_STATUS_SCREEN_BUILT_IN=y
+# CONFIG_ZMK_LV_FONT_DEFAULT_SMALL_MONTSERRAT_26=y
+# CONFIG_LV_FONT_DEFAULT_MONTSERRAT_26=y

zmk-config/config/boards/shields/ownkb/ownkb.dtsi

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <dt-bindings/zmk/matrix_transform.h>
+
+/ {
+    chosen {
+        zmk,kscan = &kscan0;
+        zmk,matrix_transform = &default_transform;
+    };
+
+    default_transform: keymap_transform_0 {
+        compatible = "zmk,matrix-transform";
+        columns = <5>;
+        rows = <10>;
+
+        map = <
+                RC(1,0) RC(2,0) RC(3,0) RC(4,0) RC(5,0)                 RC(6,0) RC(7,0) RC(8,0)  RC(9,0) RC(10,0)
+        RC(0,1) RC(1,1) RC(2,1) RC(3,1) RC(4,1) RC(5,1)                 RC(6,1) RC(7,1) RC(8,1)  RC(9,1) RC(10,1) RC(11,1)
+RC(0,0) RC(0,2) RC(1,2) RC(2,2) RC(3,2) RC(4,2) RC(5,2)                 RC(6,2) RC(7,2) RC(8,2)  RC(9,2) RC(10,2) RC(11,2) RC(11,0)
+        RC(0,3) RC(1,3) RC(2,3) RC(3,3) RC(4,3) RC(5,3) RC(5,4) RC(6,4) RC(6,3) RC(7,3) RC(8,3)  RC(9,3) RC(10,3) RC(11,3)
+                                RC(1,4) RC(2,4) RC(3,4) RC(4,4) RC(7,4) RC(8,4) RC(9,4) RC(10,4)
+        >;
+    };
+
+    kscan0: kscan {
+        compatible = "zmk,kscan-gpio-matrix";
+        label = "KSCAN";
+    };
+
+    left_encoder: encoder_left {
+        compatible = "alps,ec11";
+        label = "LEFT_ENCODER";
+        a-gpios = <&pro_micro 20 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
+        b-gpios = <&pro_micro 21 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
+        resolution = <4>;
+        status = "disabled";
+    };
+
+    right_encoder: encoder_right {
+        compatible = "alps,ec11";
+        label = "RIGHT_ENCODER";
+        a-gpios = <&pro_micro 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
+        b-gpios = <&pro_micro 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
+        resolution = <4>;
+        status = "disabled";
+    };
+
+    sensors {
+        compatible = "zmk,keymap-sensors";
+        sensors = <&left_encoder &right_encoder>;
+    };
+};
+
+nice_view_spi: &spi0 {
+  cs-gpios = <&pro_micro 4 GPIO_ACTIVE_HIGH>;
+};

zmk-config/config/boards/shields/ownkb/ownkb.keymap

@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+
+/ {
+    keymap {
+        compatible = "zmk,keymap";
+
+        default_layer {
+            label = "Default";
+
+bindings = <
+//                     ___________________________________________________                   ___________________________________________________
+//                     | 1       | 2       | 3       | 4       | 5       |                   | 6       | 7       | 8       | 9       | 0       |
+                         &kp N1    &kp N2    &kp N3    &kp N4    &kp N5                        &kp N6    &kp N7    &kp N8    &kp N9    &kp N0
+//           _____________________________________________________________                   _____________________________________________________________
+//           | TAB     | Q       | W       | E       | R       | T       |                   | Y       | U       | I       | O       | P       | TAB     |
+               &kp TAB   &kp Q     &kp W     &kp E     &kp R     &kp T                         &kp Y     &kp U     &kp I     &kp O     &kp P     &kp BSPC
+// _______________________________________________________________________                   _______________________________________________________________________
+// | ESC     |         | A       | S       | D       | F       | G       |                   | H       | J       | K       | L       | ;       | '       | F13     |
+     &kp ESC   &kp LCTRL &kp A     &kp S     &kp D     &kp F     &kp G                         &kp H     &kp J     &kp K     &kp L     &kp SEMI  &kp SQT   &kp RC(RA(F13))
+//           _____________________________________________________________________________________________________________________________________________
+//           | SHIFT   | Z       | X       | C       | V       | B       | MUTE    | PAUSE   | N       | M       | <       | >       | /       | SHIFT   |
+               &kp LSHFT &kp Z     &kp X     &kp C     &kp V     &kp B  &kp C_MUTE &kp C_PAUSE &kp N     &kp M     &kp LT    &kp GT    &kp SLASH &kp RSHFT
+//                                         _________________________________________________________________________________
+//                                         | WIN     | ALT     | X/FSC   | SPACE   | ENTER   | x/BSPC  | ALT     | WIN     |
+                                             &kp LGUI  &kp LALT  &lt 0 ESC &kp SPACE &kp ENTER &lt 0 BSPC &kp RALT &kp RGUI
+            >;
+
+            sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp C_NEXT C_PREV>;
+        };
+    };
+};

zmk-config/config/boards/shields/ownkb/ownkb.zmk.yml

@@ -0,0 +1,12 @@
+file_format: "1"
+id: ownkb
+name: ownkb
+type: shield
+url: https://github.com/dnlbauer/splitkeyboard
+requires: [pro_micro]
+features:
+  - keys
+  - encoder
+siblings:
+  - ownkb_left
+  - ownkb_right

zmk-config/config/boards/shields/ownkb/ownkb_left.overlay

@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "ownkb.dtsi"
+
+&kscan0 {
+    diode-direction = "row2col";
+    row-gpios
+        = <&pro_micro 19 GPIO_ACTIVE_HIGH>  // ROW 0 (outer)
+        , <&pro_micro 18 GPIO_ACTIVE_HIGH>  // ROW 1 (pinky)
+        , <&pro_micro 15 GPIO_ACTIVE_HIGH>  // ROW 2 (ring)
+        , <&pro_micro 14 GPIO_ACTIVE_HIGH>  // ROW 3 (middle)
+        , <&pro_micro 16 GPIO_ACTIVE_HIGH>  // ROW 4 (index)
+        , <&pro_micro 10 GPIO_ACTIVE_HIGH>  // ROW 5 (inner)
+        ;
+    col-gpios
+        = <&pro_micro 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>  // COL 0 (NUM)
+        , <&pro_micro 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>  // COL 1 (UPPER)
+        , <&pro_micro 7 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>  // COL 2 (HOME)
+        , <&pro_micro 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>  // COL 3 (LOWER)
+        , <&pro_micro 9 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>  // COL 4 (THUMB + ROT)
+        ;
+};
+
+&left_encoder {
+    status = "okay";
+};

zmk-config/config/boards/shields/ownkb/ownkb_right.overlay

@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2023 The ZMK Contributors
+ * SPDX-License-Identifier: MIT
+ */
+
+#include "ownkb.dtsi"
+
+&default_transform {
+    col-offset = <6>;
+};
+
+&kscan0 {
+    diode-direction = "row2col";
+    row-gpios
+        = <&pro_micro 19 (GPIO_ACTIVE_LOW)>
+        , <&pro_micro 18 (GPIO_ACTIVE_LOW)>
+        , <&pro_micro 15 (GPIO_ACTIVE_LOW)>
+        , <&pro_micro 14 (GPIO_ACTIVE_LOW)>
+        , <&pro_micro 16 (GPIO_ACTIVE_LOW)>
+        , <&pro_micro 10 (GPIO_ACTIVE_LOW)>
+        ;
+    col-gpios
+        = <&pro_micro 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
+        , <&pro_micro 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
+        , <&pro_micro 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
+        , <&pro_micro 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
+        , <&pro_micro 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>
+        ;
+};
+
+&right_encoder {
+    status = "okay";
+};

zmk-config/config/ownkb.conf

@@ -0,0 +1,3 @@
+# Uncomment these two lines to add support for encoders
+CONFIG_EC11=y
+CONFIG_EC11_TRIGGER_GLOBAL_THREAD=y