fancy jumper

ergogen/config.yaml

@@ -298,7 +298,7 @@ pcbs:
           side: B
         adjust:
           shift: [-11.45, -2.5]
-          rotate: -90
+          rotate: 180
       jumper_left_rst:
         what: jumper
         where: mcu
@@ -308,7 +308,7 @@ pcbs:
           side: B
         adjust:
           shift: [-8.9, -2.5]
-          rotate: -90
+          rotate: 180
       jumper_left_vcc:
         what: jumper
         where: mcu
@@ -318,7 +318,7 @@ pcbs:
           side: B
         adjust:
           shift: [-6.35, -2.5]
-          rotate: -90
+          rotate: 180
       jumper_left_gnd:
         what: jumper
         where: mcu
@@ -328,7 +328,6 @@ pcbs:
           side: B
         adjust:
           shift: [-8.9, 2.5]
-          rotate: 90
       jumper_right_raw:
         what: jumper
         where: mcu
@@ -338,7 +337,6 @@ pcbs:
           side: F
         adjust:
           shift: [-11.45, 2.5]
-          rotate: 90
       jumper_right_rst:
         what: jumper
         where: mcu
@@ -348,7 +346,6 @@ pcbs:
           side: F
         adjust:
           shift: [-8.9, 2.5]
-          rotate: 90
       jumper_right_vcc:
         what: jumper
         where: mcu
@@ -358,7 +355,6 @@ pcbs:
           side: F
         adjust:
           shift: [-6.35, 2.5]
-          rotate: 90
       jumper_right_gnd:
         what: jumper
         where: mcu
@@ -368,7 +364,7 @@ pcbs:
           side: F
         adjust:
           shift: [-8.9, -2.5]
-          rotate: -90
+          rotate: 180
       niceview:
         what: niceview
         where: mcu
@@ -392,6 +388,7 @@ pcbs:
           side: B
         adjust:
           shift: [20.50-2.5, -5.08]
+          rotate: -90
       jumper_nv_left_scl:
         what: jumper
         where: mcu
@@ -401,6 +398,7 @@ pcbs:
           side: B
         adjust:
           shift: [20.50-2.5, -2.54]
+          rotate: -90
       jumper_nv_left_vcc:
         what: jumper
         where: mcu
@@ -410,6 +408,7 @@ pcbs:
           side: B
         adjust:
           shift: [20.50-2.5, 0]
+          rotate: -90
       jumper_nv_left_gnd:
         what: jumper
         where: mcu
@@ -419,6 +418,7 @@ pcbs:
           side: B
         adjust:
           shift: [20.50-2.5, 2.54]
+          rotate: -90
       jumper_nv_left_cs:
         what: jumper
         where: mcu
@@ -428,6 +428,7 @@ pcbs:
           side: B
         adjust:
           shift: [20.50-2.5, 5.08]
+          rotate: -90
       jumper_nv_right_sda:
         what: jumper
         where: mcu
@@ -437,6 +438,7 @@ pcbs:
           side: F
         adjust:
           shift: [20.50-2.5, 5.08]
+          rotate: -90
       jumper_nv_right_scl:
         what: jumper
         where: mcu
@@ -446,6 +448,7 @@ pcbs:
           side: F
         adjust:
           shift: [20.50-2.5, 2.54]
+          rotate: -90
       jumper_nv_right_vcc:
         what: jumper
         where: mcu
@@ -455,6 +458,7 @@ pcbs:
           side: F
         adjust:
           shift: [20.50-2.5, 0]
+          rotate: -90
       jumper_nv_right_gnd:
         what: jumper
         where: mcu
@@ -464,6 +468,7 @@ pcbs:
           side: F
         adjust:
           shift: [20.50-2.5, -2.54]
+          rotate: -90
       jumper_nv_right_cs:
         what: jumper
         where: mcu
@@ -473,6 +478,7 @@ pcbs:
           side: F
         adjust:
           shift: [20.50-2.5, -5.08]
+          rotate: -90
       slider_f:
         what: slider
         where: mcu

ergogen/footprints/jumper.js

@@ -0,0 +1,28 @@
+module.exports = {
+    params: {
+        designator: 'J',
+        side: 'F',
+        from: undefined,
+        to: undefined
+    },
+    body: p => `
+        (module lib:Jumper (layer F.Cu) (tedit 5E1ADAC2)
+        ${p.at /* parametric position */} 
+
+        ${'' /* footprint reference */}        
+        (fp_text reference "${p.ref}" (at 0 0) (layer F.SilkS) ${p.ref_hide} (effects (font (size 1.27 1.27) (thickness 0.15))))
+        (fp_text value Jumper (at 0 -7.3) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))))
+
+        ${'' /* pins */}
+       
+        (pad 1 smd custom (at 0 -0.508 ${p.rot}) (size 0.1 0.1) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask)
+        ${p.to.str} (clearance 0.1) (zone_connect 0) (options (clearance outline) (anchor rect))
+        (primitives (gr_poly (pts (xy 0.6 -0.4) (xy -0.6 -0.4) (xy -0.6 -0.2) (xy 0 0.4) (xy 0.6 -0.2)) (width 0))))
+    
+        (pad 2 smd custom (at 0 0.508 ${p.rot}) (size 1.2 0.5) (layers ${p.side}.Cu ${p.side}.Paste ${p.side}.Mask)
+        ${p.from.str} (clearance 0.1) (zone_connect 0) (options (clearance outline) (anchor rect))
+        (primitives (gr_poly (pts (xy 0.6 0) (xy -0.6 0) (xy -0.6 -1) (xy 0 -0.4) (xy 0.6 -1)) (width 0))))
+
+        )
+    `
+}