images and BOM

README.md

@@ -1,13 +1,8 @@
-# Project: Build a keyboard
+# Project: Build a split keyboard
 
-!! This is a work-in-progress !!
+**⚠ This is still a work-in-progress ⚠**
 
--> [schematics](docs/schematic.md)
-
-## Preview
-![prototyp}e](./images/prototype.jpeg)
-
-![kicad image](images/kicad.jpeg)
+A 56 keys column-staggered fully-wireless split keyboard with scrollwheels.
 
 ## Features
 
@@ -18,3 +13,34 @@
 - Fully wireless built for Nice!Nano + ZMK (no TRRS Jack)
 - Nice!View support (5 pin connector)
 - Reversible PCB
+
+## Gallery
+
+![prototype](./images/build.jpg)
+![kicad image](images/pcb.png)
+
+## Bill of materials
+**Essentials**:
+| **Item**                        | **Count** | **Note** |
+|---------------------------------|-----------|----------|
+| Keyboard PCB                    | 2         |          |
+| Nice!Nano                       | 2         |          |
+| 12 pin headers and sockets      | 4         | You can use through-hole diode legs as pins. Sockets spacing: 2.54mm, Socket height: Using minimal height sockets might not leave enough room to mount the battery under the MCU. 3DS1002-01-1*20V13-JK by CONNFLY are a good choice, but you can also use lower ones and longer legs instead. Spiltkb has a good [guide on mounting](https://docs.splitkb.com/hc/en-us/articles/360011263059).  |
+| LiPo battery (301230)           | 2         | 110mAh   |
+| Kailh Choc v1 switches (PG1350) | 56        |          |
+| Keycaps                         | 56        |          |
+| Kailh Choc hotswap sockets      | 56        |          |
+| Encoder EVQWGD001               | 2         |          |
+| Diodes 1N4148W                  | 58        | for each key + encoder |
+| Buttons                         | 2         | reset buttons; 2 pins through-hole, tactile, 3x6x4.3mm |
+| Slider Switches                 | 2         | on/off switches; SMD, C128955 |
+| USB-C Cable                     | 1         | for copying the firmware 
+
+
+**Optional**:
+
+| **Item**                        | **Count** | **Note** |
+|---------------------------------|-----------|----------|
+| Nice!View + mounts              | 2         |          |
+| Switchplate                     | 2         | Height: 1.2mm; either 3d printed or cut pcbs |
+| Silicone feet                   | 8         |          |